Steel Valley Casting

Quality Coated Cast Bullets & Reloading Services

HI-TEK Coated Bullets 300 Blackout 220 Grain Cast Bullet
300 Blackout 220 Grain Cast Bullet

300 Blackout 220 Grain Cast Bullet

(10 customer reviews)

$10.00 – $372.00

300 Blackout bullet. 220 grain spire point boattail sized to .309. For subsonic use.

SKU: N/A Category:

Description

300 Blackout 220 grain Cast Bullet. Sized to .309. For subsonic use.

Additional information

Caliber

Bullet Weight / Type

220grn .309 dia Spire Point Boat Tail
Subsonic

Should be loaded for subsonic velocities
Quantity

1,000 Count, 50 Count, 500 Count, Case
Case Quantity

2,000ct
Shipping Rates

50ct $10 Flat Rate
Orders of 500 or more ship free

10 reviews for 300 Blackout 220 Grain Cast Bullet

  1. j watson (verified owner) –

    300 BLK HI-TEK 220grn Bullet is freakin awesome! Shot today from my 16 in barrel they produced some of the best groups i’ve achieved including ones shot with major brand name bullets. Using H4227, IMR4198 and CFE BLK at low supersonic velocities, all shot impressive groups, W296 however didn’t work well for me. the bullets held up at 1300 fps (need to back off some for longer barrel). All in all, pleasantly surprised. Good job SVC

  2. Joshua Pate (verified owner) –

    Ran a pack of fifty through my KAK 1:8 twist 16″ barrel with carbine length gas. These fed perfectly and produced very good groups loaded over H110, even from an unsteady rest. I shot them through a form 1 suppressor and had no baffle strikes or keyholing in the target. I will be buying many more of these.

  3. Daniel Grahn (verified owner) –

    Ran about 100 through a 8.5 inch pistol length gas system. Got good groups with cfe blk. Just ordered 500 more.

  4. shredderman08 (verified owner) –

    Great groups after you find your specific load. I run Howa 300 blk. 11.4 gr of CFEBLK and OAL of 2.145″ this gives a .75″ group @ 75 yds 8 shots. For accuracy be sure to weigh each bullet to get the same weight and leave very little air gap for CFE powder. This is not a compressed load. Deadly headshot kills for on hogs!! easy firearm cleaning. **Always use data at your own risk.

  5. Malcolm Norris (verified owner) –

    Very pleased with this product. Have shot several thousand from AR pistols and a bolt gun. Amazing price for a plinking projectile.

  6. Adrien Albert (verified owner) –

    These are really nice. Worked out great with a 16″ bolt gun with lil gun powder. Good price too.

  7. thunderpaw850 (verified owner) –

    These are great. I’ve tried other cast coated bullets and was not impressed due to problems with uniformity, feeding and key holes in target. No issues at all with these. They loaded great, fed flawlessly and fired consistently out of my rattler. I love that they a boat tail. Ordering more for sub loads. Not worried about baffle strikes with these. Barrel was clean.

  8. Eric Barger (verified owner) –

    Used these out of a Sig Rattler (1:5 twist) subsonic with CFE BLK and Accurate 1680. They are consistent and stabilize just fine. The bullets do leave some sort of residue on your fingers, so I’d recommend wearing gloves when handling.

  9. wfheimstra (verified owner) –

    These are my go to for 220 gr subs. My preferred load is 12.8 gr of CFE BLK out of a 9″ BCM upper with a 1:7 twist. Working on a load for Accurate 1680 next. The customer service is top notch as well – they truly care about their customers.

  10. acb.50 (verified owner) –

    These coated cast bullets are fantastic, running these @ 2.190 +/- .003 OAL, 1.715 +/- .001 OGIVE, with LC brass, CCI BR4 primer, and Vihtavuori N120 @ 10.8g, couldn’t be happier, your results may vary, but this is the perfect recipe for my 8.5 Aero M4E1 pistol. Have noticed absolutely zero leading after 300rds. Will most definitely be purchasing again, and will spread the word.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

You may also like…

Related products